-- *****************************************************************************
-- Juniper-DS3-MIB
--
-- Juniper Networks Enterprise MIB
-- DS3 MIB
--
-- Copyright (c) 1998, 1999 Redstone Communications, Inc.
-- Copyright (c) 1999, 2002 Unisphere Networks, Inc.
-- Copyright (c) 2002, 2003 Juniper Networks, Inc.
--   All Rights Reserved.
-- *****************************************************************************

Juniper-DS3-MIB  DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Integer32
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    ifIndex, InterfaceIndexOrZero
        FROM IF-MIB
    TruthValue, RowStatus, DisplayString
        FROM SNMPv2-TC
    JuniNextIfIndex
        FROM Juniper-TC
    juniMibs
        FROM Juniper-MIBs
    PerfCurrentCount, PerfIntervalCount, PerfTotalCount
        FROM PerfHist-TC-MIB
    dsx3FarEndCurrentEntry, dsx3FarEndIntervalEntry, dsx3FarEndTotalEntry,
    dsx3FarEndConfigEntry
        FROM DS3-MIB;

juniDs3MIB  MODULE-IDENTITY
    LAST-UPDATED "200309301211Z"  -- 30-Sep-03 08:11 AM EDT
    ORGANIZATION "Juniper Networks, Inc."
    CONTACT-INFO
        "       Juniper Networks, Inc.
        Postal: 10 Technology Park Drive
                Westford, MA  01886-3146
                USA
        Tel:    +1 978 589 5800
        E-mail: mib@Juniper.net"
    DESCRIPTION
        "The DS3 MIB for the Juniper Networks enterprise.  This MIB contains
        managed objects for DS3/E3 interfaces.  Management objects are provided
        to supplement those found in the standard DS3-MIB (RFC 2496)."
    -- Revision History
    REVISION    "200410120651Z"  -- 12-Oct-04 01:51 AM EST  - RX 5.0.4
    DESCRIPTION
        "Changed the upper bound value of juniDsx3LineLength from 64000 to 137 
         meters."
    REVISION    "200309301211Z"  -- 30-Sep-03 08:11 AM EDT  - JUNOSe 5.3
    DESCRIPTION
        "Changed the standard MIB support from the RFC1407-MIB (SMIv1) to the
        DS3-MIB (SMIv2)."
    REVISION    "200209162144Z"  -- 16-Sep-02 05:44 PM EDT  - JUNOSe 5.0
    DESCRIPTION
        "Replaced Unisphere names with Juniper names."
    REVISION    "200209121659Z"  -- 12-Sep-02 12:59 PM EDT  - JUNOSe 4.1
    DESCRIPTION
        "Added support for far end MDL generator number and port number.
         Added support for far end MDL carrier."
    REVISION    "200204041407Z"  -- 04-Apr-02 09:07 AM EST  - JUNOSe 4.0
    DESCRIPTION
        "Added invalid seconds objects to the far end statistics tables and more
        configuration objects."
    REVISION    "200202222121Z"  -- 22-Feb-02 04:21 PM EST  - JUNOSe 3.3
    DESCRIPTION
        "Modified the valid range for juniDsx3Ds3Channel"
    REVISION    "200104271949Z"  -- 27-Apr-01 03:49 PM EDT  - JUNOSe 3.0
    DESCRIPTION
        "Added dynamic DS3 interface support."
    REVISION    "200102050000Z"  -- 05-Feb-01               - JUNOSe 2.6
    DESCRIPTION
        "Added following objects:
             juniDsx3Ds3DsuMode
             juniDsx3Ds3BandwidthLimit
             juniDsx3Ds3DsuScrambleMode"
    REVISION      "9907270000Z"  -- 27-Jul-99               - JUNOSe 1.1
    DESCRIPTION
        "Added juniDsx3LineType and juniDsx3CellScramblerConfig."
    REVISION      "9811130000Z"  -- 13-Nov-98               - JUNOSe 1.0
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { juniMibs 4 }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniDs3Objects     OBJECT IDENTIFIER ::= { juniDs3MIB 1 }


-- /////////////////////////////////////////////////////////////////////////////
--
-- DS3 Interfaces
--
-- /////////////////////////////////////////////////////////////////////////////
--
-- The DS3 Configuration Table
--
juniDsx3ConfigTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF JuniDsx3ConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains entries for DS3/E3 interfaces present in the
        system."
    ::= { juniDs3Objects 1 }

juniDsx3ConfigEntry  OBJECT-TYPE
    SYNTAX      JuniDsx3ConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry describes the characteristics of an DS3/E3 interface."
    INDEX     { ifIndex }
    ::= { juniDsx3ConfigTable 1 }

JuniDsx3ConfigEntry ::= SEQUENCE {
    juniDsx3LineLength           Integer32,
    juniDsx3LineType             INTEGER,
    juniDsx3CellScramblerConfig  INTEGER,
    juniDsx3Channelization       TruthValue,
    juniDsx3InterfaceType        INTEGER,
    juniDsx3Application          INTEGER,
    juniDsx3Ds3Channel           INTEGER,
    juniDsx3LowerIfIndex         InterfaceIndexOrZero,
    juniDsx3RowStatus            RowStatus,
    juniDsx3Ds3DsuMode           INTEGER,
    juniDsx3Ds3BandwidthLimit    INTEGER,
    juniDsx3Ds3DsuScrambleMode   INTEGER,
    juniDsx3MdlCarrier           INTEGER,
    juniDsx3MdlTransmit          INTEGER,
    juniDsx3MdlEic               DisplayString,
    juniDsx3MdlLic               DisplayString,
    juniDsx3MdlFic               DisplayString,
    juniDsx3MdlUnit              DisplayString,
    juniDsx3MdlPfi               DisplayString,
    juniDsx3MdlPort              DisplayString,
    juniDsx3MdlGenerator         DisplayString }

juniDsx3LineLength  OBJECT-TYPE
    SYNTAX      Integer32 (0..137)
    UNITS       "meters"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The length of the DS3/E3 line in meters.  This objects provides
        information for line build out circuitry.  This object is only useful if
        the interface has configurable line build out circuitry."
    ::= { juniDsx3ConfigEntry 1 }

juniDsx3LineType  OBJECT-TYPE
    SYNTAX      INTEGER {
                    juniDsx3other(1),
                    juniDsx3M23(2),
                    juniDsx3SYNTRAN(3),
                    juniDsx3CbitParity(4),
                    juniDsx3ClearChannel(5),
                    juniE3G832(6),
                    juniE3Framed(7),
                    juniE3Plcp(8),
                    juniDsx3M23Plcp(18),
                    juniDsx3CbitParityPlcp(20) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This variable indicates the variety of DS3 C-bit or E3 application
        implementing this interface.  The type of interface affects the
        interpretation of the usage and error statistics.  The rate of DS3 is
        44.736 Mbps and E3 is 34.368 Mbps.  The dsx3ClearChannel value means
        that the C-bits are not used except for sending/receiving AIS.  Note
        that this object represents the actual line type when the corresponding
        value of dsx3LineType is dsx3other(1).

        The values, in sequence, describe:
             TITLE:              SPECIFICATION:
             dsx3M23             ANSI T1.107-1988
             dsx3SYNTRAN         ANSI T1.107-1988
             dsx3CbitParity      ANSI T1.107a-1989
             dsx3ClearChannel    ANSI T1.102-1987
             e3G832              ITU-T G.832
             e3Framed            ITU-T G.751
             e3Plcp              ETSI T/NA(91)18.
             dsx3M23Plcp         ATM Forum af-phy-0054.000
             dsx3CbitParityPlcp  ATM Forum af-phy-0054.000 "
    ::= { juniDsx3ConfigEntry 2 }

juniDsx3CellScramblerConfig  OBJECT-TYPE
    SYNTAX      INTEGER {
                    scramblerOn(1),
                    scramblerOff(2),
                    notSupported(3) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This variable indicates the state of the ATM cell scrambler for
        interfaces which support ATM over DS3 or E3.  For interfaces which do
        not support ATM, this object returns the value notSupported(3)."
    ::= { juniDsx3ConfigEntry 3 }

juniDsx3Channelization  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The channelization setting for this DS3 interface; true(1) indicates
        channelization, false(2) indicates no channelization."
    ::= { juniDsx3ConfigEntry 4 }

juniDsx3InterfaceType  OBJECT-TYPE
    SYNTAX      INTEGER {
                    ds3T3(0),
                    ds3E3(1) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The DS3 interface type setting."
    ::= { juniDsx3ConfigEntry 5 }

juniDsx3Application  OBJECT-TYPE
    SYNTAX      INTEGER {
                    ds3FrameOverDs3(0),
                    ds3AtmOverDs3(1) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The interface application setting."
    ::= { juniDsx3ConfigEntry 6 }

juniDsx3Ds3Channel  OBJECT-TYPE
    SYNTAX      INTEGER (1..28)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The DS3 channel setting.  The range of channel settings depends on the
        line rate of the underlying interface."
    ::= { juniDsx3ConfigEntry 7 }

juniDsx3LowerIfIndex  OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The ifIndex of the interface over which this DS3 interface is to be
        layered.  A value of zero indicates no layering.  An implementation may
        choose to require that a nonzero value be configured at entry creation."
    ::= { juniDsx3ConfigEntry 8 }

juniDsx3RowStatus  OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Controls creation/deletion of entries in this table according to the
        RowStatus textual convention, constrained to support setting the
        following values only:
            createAndGo
            destroy

        To create an entry in this table, the following entry objects MUST be
        explicitly configured:
            juniDsx3RowStatus
            juniDsx3LowerIfIndex

        In addition, when creating an entry the following conditions must hold:

            A value for ifIndex must have been determined previously, by reading
            juniDsx3NextIfIndex.

            The interface identified by juniDsx3LowerIfIndex must exist.

        A corresponding entry in ifTable/ifXTable/juniIfTable is created/
        destroyed as a result of creating/destroying an entry in this table."
    ::= { juniDsx3ConfigEntry 9 }

juniDsx3Ds3DsuMode  OBJECT-TYPE
    SYNTAX      INTEGER {
                    ds3DsuModeNone(0),
                    ds3DsuLarsCom(2),
                    ds3DsuDigitalLink(4) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The DSU configuration setting for this entry."
    DEFVAL    { ds3DsuModeNone }
    ::= { juniDsx3ConfigEntry 10 }

juniDsx3Ds3BandwidthLimit  OBJECT-TYPE
    SYNTAX      INTEGER (0..44210)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The DSU bandwidth configuration for this entry."
    DEFVAL    { 0 }
    ::= { juniDsx3ConfigEntry 11 }

juniDsx3Ds3DsuScrambleMode  OBJECT-TYPE
    SYNTAX      INTEGER {
                    ds3DsuScrambleDisabled(0),
                    ds3DsuScrambleEnable(1) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The DSU scramble mode setting for this entry."
    DEFVAL    { ds3DsuScrambleDisabled }
    ::= { juniDsx3ConfigEntry 12 }

juniDsx3MdlCarrier  OBJECT-TYPE
    SYNTAX      INTEGER {
                    disabled(0),
                    enabled(1) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "Specifies the interface is used in carrier environment."
    DEFVAL    { disabled }
    ::= { juniDsx3ConfigEntry 13 }

juniDsx3MdlTransmit  OBJECT-TYPE
    SYNTAX      INTEGER {
                    path(1),
                    idlesignal(2),
                    pathIdlesignal(3),
                    testsignal(4),
                    pathTestsignal(5),
                    idlesignalTestsignal(6),
                    pathIdlesignalTestsignal(7),
                    none(8) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "Specifies transmission enabling."
    DEFVAL    { none }
    ::= { juniDsx3ConfigEntry 14 }

juniDsx3MdlEic  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..10))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is the equipment identification code."
    DEFVAL    { "" }
    ::= { juniDsx3ConfigEntry 15 }

juniDsx3MdlLic  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..11))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is the location identification code."
    DEFVAL    { "" }
    ::= { juniDsx3ConfigEntry 16 }

juniDsx3MdlFic  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..10))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is the frame identification code."
    DEFVAL    { "" }
    ::= { juniDsx3ConfigEntry 17 }

juniDsx3MdlUnit  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..6))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is the unit identification code."
    ::= { juniDsx3ConfigEntry 18 }

juniDsx3MdlPfi  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..38))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is the facility identification code to send in the MDL path
        message."
    DEFVAL    { "" }
    ::= { juniDsx3ConfigEntry 19 }

juniDsx3MdlPort  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..38))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is the equipment port number to send in the MDL idle signal
        message."
    ::= { juniDsx3ConfigEntry 20 }

juniDsx3MdlGenerator  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..38))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is the generator number to send in the MDL test signal message."
    ::= { juniDsx3ConfigEntry 21 }


juniDs3NextIfIndex  OBJECT-TYPE
    SYNTAX      JuniNextIfIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Coordinate ifIndex value allocation for entries in juniDsx3ConfigTable.

        A GET of this object returns the next available ifIndex value to be used
        to create an entry in the associated interface table; or zero, if no
        valid ifIndex value is available.  This object also returns a value of
        zero when it is the lexicographic successor of a varbind presented in an
        SNMP GETNEXT or GETBULK request, for which circumstance it is assumed
        that ifIndex allocation is unintended.

        Successive GETs will typically return different values, thus avoiding
        collisions among cooperating management clients seeking to create table
        entries simultaneously."
    ::= { juniDs3Objects 2 }


--
-- The DS3 Far End Current
--
-- The DS3 Far End current table contains statistics being
-- collected for the current 15 minute interval.
--
juniDsx3FarEndCurrentTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF JuniDsx3FarEndCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains entries for DS3/E3 interfaces present in the
        system."
    ::= { juniDs3Objects 3 }

juniDsx3FarEndCurrentEntry  OBJECT-TYPE
    SYNTAX      JuniDsx3FarEndCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry describes the characteristics of an DS3/E3 interface."
    AUGMENTS  { dsx3FarEndCurrentEntry }
    ::= { juniDsx3FarEndCurrentTable 1 }

JuniDsx3FarEndCurrentEntry ::= SEQUENCE {
    juniDsx3FarEndCurrentInvalidSeconds     PerfCurrentCount }

juniDsx3FarEndCurrentInvalidSeconds  OBJECT-TYPE
    SYNTAX      PerfCurrentCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The counter associated with the number of Invalid Seconds encountered
        by a DS3/E3 interface in the current 15 minute interval."
    ::= { juniDsx3FarEndCurrentEntry 1 }


--
-- the DS3 Far End Interval
-- The DS3 Far End Interval Table contains statistics collected by each DS3
-- Interface over the previous 24 hours of operation.  The past 24 hours are
-- broken into 96 completed 15 minute intervals.
--
juniDsx3FarEndIntervalTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF JuniDsx3FarEndIntervalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains entries for DS3/E3 interfaces present in the
        system."
    ::= { juniDs3Objects 4 }

juniDsx3FarEndIntervalEntry  OBJECT-TYPE
    SYNTAX      JuniDsx3FarEndIntervalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry describes the characteristics of an DS3/E3 interface."
    AUGMENTS  { dsx3FarEndIntervalEntry }
    ::= { juniDsx3FarEndIntervalTable 1 }

JuniDsx3FarEndIntervalEntry ::= SEQUENCE {
    juniDsx3FarEndIntervalInvalidSeconds    PerfIntervalCount }

juniDsx3FarEndIntervalInvalidSeconds  OBJECT-TYPE
    SYNTAX      PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The counter associated with the number of Invalid Seconds encountered
        by a DS3/E3 interface in one of the previous 96 individual 15 minute
        intervals."
    ::= { juniDsx3FarEndIntervalEntry 1 }


--
-- the DS3 Far End Total
-- The DS3 Far End Total Table contains the cumulative sum of the
-- statistics for the 24 hour period preceding the current interval.
--
juniDsx3FarEndTotalTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF JuniDsx3FarEndTotalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains entries for DS3/E3 interfaces present in the
        system."
    ::= { juniDs3Objects 5 }

juniDsx3FarEndTotalEntry  OBJECT-TYPE
    SYNTAX      JuniDsx3FarEndTotalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry describes the characteristics of an DS3/E3 interface."
    AUGMENTS  { dsx3FarEndTotalEntry }
    ::= { juniDsx3FarEndTotalTable 1 }

JuniDsx3FarEndTotalEntry ::= SEQUENCE {
    juniDsx3FarEndTotalInvalidSeconds   PerfTotalCount }

juniDsx3FarEndTotalInvalidSeconds  OBJECT-TYPE
    SYNTAX      PerfTotalCount
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The counter associated with the number of Invalid Seconds encountered
        by a DS3/E3 interface in the previous 24 hour interval."
    ::= { juniDsx3FarEndTotalEntry 1 }


--
-- The DS3 Far End Configuration Table
--
-- The DS3 Far End Configuration Table contains
-- configuration information
-- reported in the C-bits from the remote end.

juniDsx3FarEndConfigTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF JuniDsx3FarEndConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains entries for DS3/E3 interfaces present in the
        system."
    ::= { juniDs3Objects 6 }

juniDsx3FarEndConfigEntry  OBJECT-TYPE
    SYNTAX      JuniDsx3FarEndConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry describes the far end configuration characteristics of an
        DS3/E3 interface."
    AUGMENTS  { dsx3FarEndConfigEntry }
    ::= { juniDsx3FarEndConfigTable 1 }

JuniDsx3FarEndConfigEntry ::= SEQUENCE {
    juniDsx3FarEndPortNumber        DisplayString,
    juniDsx3FarEndGeneratorNumber   DisplayString,
    juniDsx3FarEndCarrier           INTEGER }

juniDsx3FarEndPortNumber  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..38))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This code identifies the port number of the Far End DS3.  It is sent
        within the Idle Signal Message."
    ::= { juniDsx3FarEndConfigEntry 1 }

juniDsx3FarEndGeneratorNumber  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..38))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This code identifies the Far End DS3 Generator Number.  It is sent
        within the Test Signal Message."
    ::= { juniDsx3FarEndConfigEntry 2 }

juniDsx3FarEndCarrier  OBJECT-TYPE
    SYNTAX      INTEGER {
                    disabled(0),
                    enabled(1) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specifies the interface is used in carrier environment.  It is sent
        with MDL messages."
    ::= { juniDsx3FarEndConfigEntry 3 }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Notifications
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- No notifications are defined in this MIB.  Placeholders follow.
-- juniDs3TrapControl      OBJECT IDENTIFIER ::= { juniDs3MIB 2 }
-- juniDs3Traps            OBJECT IDENTIFIER ::= { juniDs3MIB 3 }
-- juniDs3TrapPrefix       OBJECT IDENTIFIER ::= { juniDs3Traps 0 }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniDs3Conformance OBJECT IDENTIFIER ::= { juniDs3MIB 4 }
juniDs3Compliances OBJECT IDENTIFIER ::= { juniDs3Conformance 1 }
juniDs3Groups      OBJECT IDENTIFIER ::= { juniDs3Conformance 2 }

--
-- compliance statements
--
juniDs3Compliance  MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "Obsolete compliance statement for entities which implement the Juniper
        DS3/E3 MIB.  This statement became obsolete when support was added for
        line type and cell scrambler objects."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniDs3Group }
    ::= { juniDs3Compliances 1 }                                   -- JUNOSe 1.0

juniDs3Compliance2  MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "Obsolete compliance statement for entities which implement the Juniper
        DS3/E3 MIB.  This statement became obsolete when support was added for
        DSU objects."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniDs3Group2 }
    ::= { juniDs3Compliances 2 }                                   -- JUNOSe 1.1

juniDs3Compliance3  MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "Obsolete compliance statement for entities which implement the Juniper
        DS3/E3 MIB.  This statement became obsolete when support was added for
        dynamic DS3 interface objects."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniDs3Group3 }
    ::= { juniDs3Compliances 3 }                                   -- JUNOSe 2.6

juniDs3Compliance4  MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "Obsolete compliance statement for entities which implement the Juniper
        DS3/E3 MIB.  This statement became obsolete when far end invalid seconds
        objects and more configuration objects were added."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniDs3Group4 }
    ::= { juniDs3Compliances 4 }                                   -- JUNOSe 3.0

juniDs3Compliance5  MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "Obsolete compliance statement for entities which implement the Juniper
        DS3/E3 MIB.  This statement became obsolete when support was added for
        far end generator number, port number and carrier."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniDs3Group5,
            juniDs3FarEndGroup }
    ::= { juniDs3Compliances 5 }                                   -- JUNOSe 4.0

juniDs3Compliance6  MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for entities which implement the Juniper
        DS3/E3 MIB."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniDs3Group5,
            juniDs3FarEndGroup2 }
    ::= { juniDs3Compliances 6 }                                   -- JUNOSe 4.1

--
-- units of conformance
--
juniDs3Group  OBJECT-GROUP
    OBJECTS {
        juniDsx3LineLength }
    STATUS      obsolete
    DESCRIPTION
        "Obsolete collection of objects providing management of DS3/E3
        interfaces in a Juniper product.  This group became obsolete when
        support was added for line type and cell scrambler objects."
    ::= { juniDs3Groups 1 }

juniDs3Group2  OBJECT-GROUP
    OBJECTS {
        juniDsx3LineLength,
        juniDsx3LineType,
        juniDsx3CellScramblerConfig }
    STATUS      obsolete
    DESCRIPTION
        "Obsolete collection of objects providing management of DS3/E3
        interfaces in a Juniper product.  This group became obsolete when
        support was added for DSU configuration objects."
    ::= { juniDs3Groups 2 }

juniDs3Group3  OBJECT-GROUP
    OBJECTS {
        juniDsx3LineLength,
        juniDsx3LineType,
        juniDsx3CellScramblerConfig,
        juniDsx3Ds3DsuMode,
        juniDsx3Ds3BandwidthLimit,
        juniDsx3Ds3DsuScrambleMode }
    STATUS      obsolete
    DESCRIPTION
        "Obsolete collection of objects providing management of DS3/E3
        interfaces in a Juniper product.  This group became obsolete when
        support was added for dynamic DS3 interface objects."
    ::= { juniDs3Groups 3 }

juniDs3Group4  OBJECT-GROUP
    OBJECTS {
        juniDsx3LineLength,
        juniDsx3LineType,
        juniDsx3CellScramblerConfig,
        juniDsx3Channelization,
        juniDsx3InterfaceType,
        juniDsx3Application,
        juniDsx3Ds3Channel,
        juniDsx3LowerIfIndex,
        juniDsx3RowStatus,
        juniDsx3Ds3DsuMode,
        juniDsx3Ds3BandwidthLimit,
        juniDsx3Ds3DsuScrambleMode,

        juniDs3NextIfIndex }
    STATUS      obsolete
    DESCRIPTION
        "Obsolete collection of objects providing management of DS3/E3
        interfaces in a Juniper product.  This group became obsolete when more
        configuration objects were added."
    ::= { juniDs3Groups 4 }

juniDs3Group5  OBJECT-GROUP
    OBJECTS {
        juniDsx3LineLength,
        juniDsx3LineType,
        juniDsx3CellScramblerConfig,
        juniDsx3Channelization,
        juniDsx3InterfaceType,
        juniDsx3Application,
        juniDsx3Ds3Channel,
        juniDsx3LowerIfIndex,
        juniDsx3RowStatus,
        juniDsx3Ds3DsuMode,
        juniDsx3Ds3BandwidthLimit,
        juniDsx3Ds3DsuScrambleMode,
        juniDsx3MdlCarrier,
        juniDsx3MdlTransmit,
        juniDsx3MdlEic,
        juniDsx3MdlLic,
        juniDsx3MdlFic,
        juniDsx3MdlUnit,
        juniDsx3MdlPfi,
        juniDsx3MdlPort,
        juniDsx3MdlGenerator,

        juniDs3NextIfIndex }
    STATUS      current
    DESCRIPTION
        "A collection of objects providing management of DS3/E3 interfaces in a
        Juniper product."
    ::= { juniDs3Groups 5 }

juniDs3FarEndGroup  OBJECT-GROUP
    OBJECTS {
        juniDsx3FarEndCurrentInvalidSeconds,
        juniDsx3FarEndIntervalInvalidSeconds,
        juniDsx3FarEndTotalInvalidSeconds }
    STATUS      obsolete
    DESCRIPTION
        "Obsolete collection of objects providing remote statistics information
        applicable to DS3 interfaces in a Juniper product.  This group became
        obsolete when remote port number, generator number and carrier objects
        were added."
    ::= { juniDs3Groups 6 }

juniDs3FarEndGroup2  OBJECT-GROUP
    OBJECTS {
        juniDsx3FarEndCurrentInvalidSeconds,
        juniDsx3FarEndIntervalInvalidSeconds,
        juniDsx3FarEndTotalInvalidSeconds,
        juniDsx3FarEndPortNumber,
        juniDsx3FarEndGeneratorNumber,
        juniDsx3FarEndCarrier }
    STATUS      current
    DESCRIPTION
        "A collection of objects providing remote statistics information
        applicable to DS3 interfaces in a Juniper product."
    ::= { juniDs3Groups 7 }

END